Command
Data
Description
PSW
New
password
Change password. E.g.:PSW 123456 654123
TXTA
Object name
Set object name. E.g.:TXTA 123456 House
TXTE
N1=<TEXT>
……
N5=<TEXT>
Set SMS text about input or output activation.
N1…N5
– number of the terminal contact.
E.g.: TXTE 123456 N1=Alarm in the living room
TXTR
N1=<TEXT>
……
N5=<TEXT>
Set SMS text about input or output recovery.
N1…N5
- number of the terminal contact.
E.g.: TXTR 123456 N5=Relay is off
SETA
NoX=phoneN
o#name
Add an administrator to the list. User‘s phone
number and name will be written to the
specified line. Phone number has to be
separated from the name using a hashtag (#).
The number must start with (+) and country
code.
E.g.: SETA 123456 No3=+37061234567#John
NoX=DEL
Delete administrator’s phone number and
name from the specified place.
E.g.: SETA 123456 No1=DEL
SETU
PhoneNo#
name
Add a new user. Saves user’s phone number
and username. Phone number has to be
separated from the name using a hashtag
(#).The number must start with (+) and country
code.
E.g.: SETU 37061234567#John Snow
DELU
PhoneNo
Delete a user using his phone number. E.g.:
DELU 37061234567
Name
Delete a user using his name.
E.g.: DELU 123456 John Snow
SETD
IDx=yy
Set „x“ input inactivity time. „yy“ is the
inactivity time in minutes, from 0 to 2880.
After the input is activated, controller will send
a notification and will not react to following
circuit disruptions during the set time. If 0 is
entered, inactivity will be turned off.
E.g.: SETD 123456 ID1=30
RESD
IDx
Resets „x“ input inactivity time, if the
countdown has started.
E.g.: RESD 123456 ID1
RESET
Restart the controller.
E.g.: RESET 123456
TIME
YYYY/MM/DD
,
HH:mm:ss
Set time and date.
E.g.: TIME 123456 2018/01/03,12:23:00
RDR
PhoneNo#
SMStext
Forward SMS messages to specified number.
E.g.: RDR 37061234567#top-up the
phone 10EUR
UUSD
*UUSD code# Sends UUSD code to the network operator.
With UUSD codes (given by the operator) it is
possible to check and top-up the SIM card
balance, execute other actions.
E.g.: UUSD 123456 *245#
Connect
Protegus=ON
Connect to Protegus cloud. E.g.:
CONNECT 123456 PROTEGUS=ON
Protegus=OFF Disconnect from Protegus cloud.
E.g.: CONNECT 123456 PROTEGUS=OFF