Remote control via phone call
Make a call to the number of the inserted SIM card.
Default settings allow everyone to control, who call the telephone
number of the SIM card inserted to GV17.
A call will turn on the 5 OUT relay output for 3 (three) seconds. The
phone call is free of charge as the controller automatically rejects it.
Remote control via Protegus application
1.
Turn on the internet access for the controller
To enable connection with Protegus, send an SMS in such format to
the telephone number of SIM card inserted in the GV17:
Connect xxxxxx protegus=on,apn=internet
xxxxxx
6-digit administrator password
(default password – 123456)
LED indication
LED
LED Status
Description
NETWORK
Green solid
Connected to GSM network
Blinking yellow
GSM signal strength from 0 to 5.
Sufficient is 3.
DATA
Green solid
Sending message
Yellow solid
Unsent events are stored in buffer
POWER
Blinking green
Power supply is sufficient
Blinking yellow
Low power supply voltage
Blinking green
and yellow
Configuration mode
TROUBLE
Not solid and
not blinking
No trouble
1 blink
No SIM card
2 blinks
Incorrect SIM card PIN code
3 blinks
Cannot connect to GSM network
4 blinks
Cannot connect to Protegus or to
primary IP receiver
5 blinks
Cannot connect to backup IP
receiver
6 blinks
Internal GV17 clock is not set
7 blinks
Power supply is insufficient
If the controller LED indication is completely off, check the power supply
and connections.
!! Internet connection is necessary for communication with Protegus.
Make sure that internet access is enabled for the SIM inserted into GV17.
The first user who calls the controller (or sends an SMS) will become the
system administrator and will be the only one who can manage and
control the GV17 with SMS commands.
