3.2
Rear Panel Connections
OUT-L
OUT-R
9
10
11
12
13
14
15
16
17
18
19
20
REMOTE
POWER
30V-DC
OUT
IN-7
IN-6
IN-5
2
1
3
4
SPDIF-INPUTS
L
R
Handmade in GERMANY by
PRE A MP LIFIER
SnowWhite II
9 REMOTE:
Once the
SnowWhite II
is turned on there is a control voltage at this jack to
powered on prepared power amps or prepared active speakers simultaneously with the
pre amplifier.
10 Power Supply Input:
This input is used to connect the external power supply to the Snow White (30V DC).
CAUTION!!!
Please never try to connect a similar cable from a Telephone or Computer
network! This could damage the Snow White which would not be covered by our warranty.
In addtion, we would not be responsible for any other damage this may cause!
11
Balanced Output R
:
This is the balanced XLR output for the right channel. This output can be used with either
an amplifier or active loudspeaker that has a balanced XLR input. Pin configuration is as
follows:
Pin 1 - Ground
Pin 2 - Positive Signal (+).
Pin 3 - Negative Signal (-).
12 Balanced Output L :
This is the balanced XLR output for the left channel. This output can be used with either
an amplifier or active loudspeaker that has a balanced XLR input. Pin configuration is as
follows:
Pin 1 - Ground
Pin 2 - Positive Signal (+).
Pin 3 - Negative Signal (-).
7
Содержание SnowWhite II
Страница 1: ...USERS MANUAL FOR PREAMPLIFIER SnowWhite II...
