Trigon SnowWhite II, Руководство пользователя

Страница: 12 / 16

output [13] is used to record output, ie adjusting the volume is turned off for this output
and it is independent from the volume setting signal. The display now shows “
1 “.
CAUTION! Go to wisely with this adjustment and make sure that no power amplifier or
active speakers is connected to the output [13], if you switch this output to record output !!!
Go to the next menu item is accessed by turning the input knob [1] clockwise.
The MODE menu can be exited by pressing the input knob [1] or it is automatically
changed after about 12 seconds in normal mode.
4.5 Unity Gain – Home Theater Through-put
This setting option will by-pass the volume control of a chosen input. This feature is useful
if integrating the
SnowWhite II
into a multichannel system. Only the analogue
inputs 5 to 7 are used for this feature .
Once you are in unity gain mode the input display shows a " u " and right of the currently
selected input, eg " 5 " on. Use the volume knob [7] to select the input to be switched to
unity gain.
Long press the volume knob [7] is now slowly building a "
0 " and once it is fully displayed
showing the digit " - " and the volume control is now bypassed for this input.
The input signal is now performed without attenuation or amplification directly at the
output stage. The volume setting must now be made to the surround processor.
CAUTION! Please be careful when enabling this setting as unintentional switching this
feature during the current music program at a fairly high volume jump leads !!!
The unity gain setting remains preset in the memory until it is canceled within this menu by
12