Trigon SnowWhite II, Руководство пользователя

Страница: 3 / 16

1 Introduction
Valued
Trigon
- Customer
We are excited that you have chosen to purchase the
SnowWhite II
preamplifier.
This unit was built using the highest quality control to insure utmost precision in
manufacturing.
Whether you are a beginner to Hi-Fi or advanced user, it is highly recommended that you
read and understand this User’s Manual thoroughly before using your new preamplifier.
Be sure to keep this manual easily accessible as it could come in handy during normal
use of this preamplifier.
We hope that you enjoy your new preamplifier and thank you for choosing
Trigon
2 General Description
The
SnowWhite II
is a High-End preamplifier with three analogue high-level inputs
and four digital SPDIF inputs.
This preamplifier is completely controlled by a sophisticated microprocessor. The features
of the
SnowWhite II
are both accessible via the front panel or via the
Director
remote control. The front panel features a dimming Display that informs
users of the active in-use configuration. The unit can also be turned off or on via the
remote control when in stand-by mode.
The volume setting is controlled through a special D/A Converter and as such is both
technically and sonically far superior to a traditional volume pot (potentiometer). This
method of volume control allows for a channel output that is exact at low volume as well
as high volume settings, insuring that the sound stage doesn’t wander or lose focus with
each change of the volume setting.
The power supply also boasts noteworthy features in its design. The external power
supply delivers the preamplifier with controlled even voltage. Inside the preamplifier itself,
is housed the current regulation for all the gain stages. This power supply design helps
reduce the possibility of inducing hum into the system.
2.1 Safety Information
Trigon Elektronik GmbH
will not assume any responsibility for damages
occurred from unsafe handling of the product or from not adhering to the recommend
safety instructions below.
- The preamplifier should not be used unmonitored in close proximity to heat
producing devices such as Water heaters, Fireplaces or Flammable materials.
- The preamplifier is not designed to withstand heavy impacts or severe vibrations.
-
The preamplifier should not be used un-monitored when being transported from a
3