888-313-1303
www.trigonsports.com
9
STEP 5
DOLLEY ASSEMBLY
1. Attach dolly assembly mounting plates as shown in pictures above. Be sure black mount-
ing shaft is attached to plate as shown using proper ring spacer between tire mounting
plate and shaft.
2. Using (2) Elbow brackets, dolly handle, wheel shaft, and hardware in bag (Part E). Begin
assembly as shown in pictures above. Be sure that the heads of the bolts are on the inside of
the mounting plate facing the tires and the nuts are on the outside of the mounting plates.
Be sure to use washers and wheel shaft to mount tire same as in Step 4. Use heavy duty cot-
ter pins to secure wheel shaft in place. The mounting plate will be inserted to upper shaft of
mounting plate. It may take 2 persons to lift back frame assembly to properly mount dolly
assembly inside the upper wheel shaft. The weight of the cage keeps the dolly assembly in
place.
STEP 6
ATTACHING FRONT CORNER FRAME
1. Locate corner frames shown above. Mount each side to mounting bracket on front of ‘V’
shaped lower frame assembly. Also secure V frame to already welded front bracket as well.
Use 3.5”L bolts and nuts and washers provided in hardware bag (Part G).
