888-313-1303
www.trigonsports.com
13
STEP 11
NET ASSEMBLY
1. Unpack net and lay out under the cage. Position the net with the attached baffle net on the bottom
side of the net and towards the back of the cage. Locate net tags to guide you for correct position.
2. Using (4) adjustable net hanging straps and a ladder. Safely attach net to underneath cross bars.
The net straps should be loose enough that the net hangs about 12” below the frame. Be sure that
the net is not attached to lifting bars. Only the cross rib sections. The adjustable hanging straps are
a temporary tool to help position the net and hold into place while lacing the net.
3. Use several zip ties to position net along top of vinyl skirt and side frames.
4. Use lacing twine to secure net on the front rib section and also on rib frame above vinyl skirt. The
net will also be laced along the front lower reinforced corner. See picture above for reference.
5. The two middle rib sections will only require the precut cords spaced evenly along the perimeter
if the rib sections. Tie precut cords in a loop fashion to allow the net to hang about 8-12” below the
frame. This will help prevent ricochet on the middle rib sections.
