Page 8
Teledial HS
STANDARD MODE
When the handset is lifted, the Teledial HS dials a pre-
programmed phone number and monitors the line for
the following signals:
Busy Signal: The HS will hang up and redial the
number after approximately three busy tones.
Ring Signal: The HS will hang up and redial the
number after approximately six unanswered rings
(36 seconds).
Voice or Touch-tones: This indicates an answer.
The unit then enters the Talk Mode.
Answering the Call From the Teledial HS
Answer the Teledial HS incoming call with a short phrase
at least 3 seconds long. The unit may fail to recognize
a short greeting such as “Hello” and may not turn on the
microphone.
To Terminate the Call, press '7'.
To Reset the Teledial HS's Call Length Timer,
press '8'.
Note: The unit will beep twice to warn of auto-call
termination in 10 seconds.
To Retrieve the HS-2s Site ID number, press '#'.
Note: If the wrong Program code is entered, the unit
will immediately hang up. If the program code or other
information is not entered completely, the HS-2 will time-
out and hang up.
OPERATION
OPERATION
OPERATION
OPERATION
OPERATION
EMERGENCY MODE
When the handset is lifted, the Teledial HS dials a pre-
programmed phone number, and monitors the line for
the following signals:
Busy Signal: The HS will hang up and redial the
number after approximately three (3) busy tones.
Ring Signal: The HS will hang up and redial the
number after approximately six unanswered rings
(36 seconds).
Voice or Touch-tones: This indicates an answer.
The unit then enters the Talk Mode.
Answering the Call From the HS-2
Answer the Teledial HS incoming call with a short
phrase at least 3 seconds long. The unit may fail to
recognize a short greeting such as “Hello” and may not
turn on the microphone.
Once voice communication has been established you
may then press keys on your touch-tone telephone to
do any of the following:
1. To Terminate the Call, press '7'.
2. To Reset the HS-2's Call Length Timer,
press '8'.
Note: The unit will beep twice to warn of auto-call
termination in 10 seconds.
3. To Retrieve the HS-2's Site ID number,
press '
✽
'.
4. To Enter the Program Mode, press '#',
followed by the four digit Program Code.
When the Teledial HS is in the Emergency Mode, the
call can only be terminated by the party that answers
the call when they press '7' on their telephone keypad.
Содержание TELEDIAL HS
Страница 10: ...Page 10 Teledial HS...
