Trig Avionics TX56, Руководство по эксплуатации

Страница: 9 / 42

EN
7
If a new transmission is received during playback, the playback is cancelled
and the live transmission will be heard instead.
Intercom Function
The Nav/Com has a built in intercom which can be installed as permanently
engaged or selected via a switch. The intercom is voice activated and the
audio is routed through to both of the headsets. The intercom squelch and
volume can be adjusted independently from the radio function through the
configuration menu.
Frequency Database
The Nav/Com has up to three types of database containing frequencies and
station identifiers for both com and nav frequencies. One is stored in the
radio and configured by the pilot; it will always be available. One is a list of
the ten most recently used frequencies; it will be populated automatically as
you use the radio. The third is only available if your Nav/Com has been
connected to a compatible GPS receiver, and contains frequencies loaded
from the GPS database.
Note that the TX56A is only able to store and recall 25 KHz com channel
frequencies.
To access these databases press the MEM button whilst in the applicable
mode – there are separate com databases and nav databases. The right hand
part of the window will be replaced with the database screen which always
starts on the pilot created database.
The large knob moves the highlighted cursor, whilst the small knob selects the
value at the cursor.
Airfield or facility identifiers are in alphabetical order. Use the small knob to
scroll through the identifiers until you find the one that you want. Move the