manualshive.com logo in svg

Tridonic x/e-touchPANEL 02, Руководство пользователя

Поделиться
Скачать
Tridonic x/e-touchPANEL 02 Скачать руководство пользователя страница 4

Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en

Scope of documentation

c

4 / 118

This operating instruction is valid for the DALI control system x/e-touchPANEL 02.

TRIDONIC GmbH & Co KG is constantly striving to develop all its products. This means that there may be changes
in form, equipment and technology.
Claims cannot therefore be made on the basis of information, diagrams or descriptions in these instructions.

The latest version of these operating instructions is available on our home page.

1.1. Copyright

This documentation may not be changed, expanded, copied or passed to third parties without the prior written
agreement of TRIDONIC GmbH & Co KG.
We are always open to comments, corrections and requests. Please send them to 

[email protected]

1.2. Imprint

Tridonic GmbH & Co KG
Färbergasse 15
6851 Dornbirn
Austria
T +43 5572 395-0
F +43 5572 20176

www.tridonic.com

The instructions in this section have been compiled to ensure that operators and users of DALI control system
x/e-touchPANEL 02 from Tridonic are able to detect potential risks in good time and take the necessary preventative
measures.

I

NOTICE

Software updates

The software for the x/e-touchPANEL 02 is continuously developed and
improved. Software updates are provided to our customers free of charge.

To make sure that you always use the latest software version, you can register
at 

.

www.tridonic.com/xe

As a registered user you will be notified by email whenever a new update is
available.

To register, follow the link 

 or scan the QR code with your

www.tridonic.com/xe

smartphone.

 

This device may only be installed and configured by suitably qualified personnel.

_

Every operator must read these operating instructions carefully and comply with the instructions contained
therein.

_

The operator must ensure that all users fully understand these instructions and adhere to them.

_

Содержание x/e-touchPANEL 02























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды