manualshive.com logo in svg

Tridonic x/e-touchPANEL 02, Руководство пользователя

Поделиться
Скачать
Tridonic x/e-touchPANEL 02 Скачать руководство пользователя страница 12

Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en

Basic Settings

c

12 / 118

1.  

2.  

3.  

4.  

5.  

1.  

2.  

3.  

4.2.4. Setting the time and date

Setting the time and date is necessary for time-controlled actions and for the frame light.

 

Click on the "Main menu" symbol.
-> The "Main menu" is displayed

Click on the "Time & date" symbol in the Main menu.

The dialog box Time & Date is displayed. 

-> 

Use the arrow keys to set the time and date and confirm with OK.

If the time is to be set automatically to summer or winter time, click on the arrow key below the
Summer/Wintertime Changeover and select the time zone in which the device is located.

Confirm the settings with OK

4.2.5. Cleaning the touchscreen

The touchscreen can be 

 

 

temporarily disabled for cleaning to avoid accidentally changing settings.

 

 

The cleaning is

 

 

 was di

also possible without a password in case the configuration

sabled.

Click on the "Main menu" symbol.
-> The "Main menu" is displayed

Click on the "Configuration" button
-> The "Configuration" page is displayed
-> The "Display" tab is displayed.

Click on the Clean button.
-> The touchscreen is deactivated for 20 seconds. The remaining time is indicated.

I

NOTICE

The x/e-touchPANEL is supplied by a back-up battery for up to 3 days in the event of a power failure. If no voltage
is supplied to the x/e-touchPANEL for a longer period of time, a dialog box indicates that the time and date must
be entered again after the restart.

Содержание x/e-touchPANEL 02























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды