Trident T20SC PRO, Руководство по эксплуатации и обслуживанию

Страница: 12 / 28

SYMBOLS USED ON THE MACHINE
LABELS USED ON THE MACHINE
SYMBOLS ON THE CONTROL PANEL
Symbol of maximum temperature for filling the solution tank:
Located on the front of the solution tank, to indicate the maximum temperature
of the water for filling the solution tank safely.
Filter body position symbol:
Located on the right-hand side of the machine to indicate the position of the
detergent solution filter.
Label for detergent solution tap control:
Located on the right-hand side of the machine, to identify the control knob of
the detergent solution tap.
Label for brush head tilt adjustment:
Located on the front of the machine, to identify the knob for adjusting the brush
head body tilt.
Label indicating the need to read the Use and Maintenance Manual:
Attached to the machine in order to warn the operator to read the user and
maintenance manual (this document) before using the machine for the first
time.
Battery recharge hazard label:
Located inside the machine (above the electric system carter), to warn the
operator of the possible risk during battery recharging
Battery recharge warning label:
Located inside the machine (above the electric system carter), to warn the
operator when it's necessary to recharge the batteries.
Daily care warning label:
Applied to the machine to remind the operator of the necessary procedures to
properly care for the machine itself.
Machine use warning label:
Located on the rear of the machine, to warn the operator which substances
cannot be removed with the machine.
Solution tank filter daily care warning label:
Applied to the machine to remind the operator to clean the solution tank after
each use.
Moving brush hazard label:
Used on the machine to warn the operator not to place his/her hands near the
moving brush.
Label warning about the risk of crushed hands:
Indicates danger to hands due to crushing between two surfaces.
Position symbol for the solution tank drainage cap:
Applied to the back of the machine to identify the solution tank drainage cap.
Position symbol for the recovery tank drainage tube:
Applied to the back of the machine to identify the recovery tank drainage tube.
Position symbol for the brush head control pedal:
Located on the rear part of the machine, to identify the brush head control
pedal.
Symbol for extra brush head pressure activation:
Located on the rear part of the machine, to identify the correct position of the
brush head control pedal in order to activate the extra pressure function.
Squeegee body working position symbol:
Located on the rear part of the machine, to indicate the squeegee control lever
rotation direction for bringing the squeegee to its working position.
Symbol for squeegee body idle:
Located on the rear part of the machine, to indicate the squeegee control lever
rotation direction for bringing the squeegee to its idle position.
Battery connection symbol:
Located on the front of the solution tank, to indicate how to connect the 12V
batteries in order to obtain a total voltage of 24V.
Main switch symbol:
Located near the control panel, to indicate the main key switch.
1. Reverse activation symbol.
2. Buttons for movement speed adjustment.
3. HEM control button (“HILLYARD ECO MODE”).
4. Control button for brush head / brush uncoupling.
5. “AREA 2” program activation button.
6. “AREA 3” program activation button.
7. “AREA 1” program activation button.
8. HNR control button (“HILLYARD NOISE REDUCTION”).
9. Buttons for detergent solution adjustment.
10. Symbol for extra brush head pressure activation.
11. Control display.
3s.
12
10
11
1
8
7 6
5
4
3
9 2