manualshive.com logo in svg

TriCom TCR-HHR-02, Руководство оператора, Страница: 7 / 26

Поделиться
Скачать
TriCom TCR-HHR-02 Скачать руководство пользователя страница 7

1 

CHAPTER 1 

GENERAL INFORMATION AND SAFETY INSTRUCTIONS 

1. INTRODUCTION. 

This manual has been prepared by Tricom Research for the purpose of providing the user
information necessary to operate the TCR-HHR-02 Tactical Repeater/Communications
System.

a.

Chapter 1 – General Information - provides safety and important information about
the TCR-HHR-02 Tactical Repeater System.

b.

Chapter 2 – Operation - provides information necessary for operating the
TCR-HHR-02 and theory of operating procedures describing how the TCR-HHR-02
accomplishes its intended purpose.

c.

Chapter 3 – Maintenance - provides information regarding TCR-HHR-02 preventive
care and corrective maintenance procedures.

d.

Chapter 4 – Warranty Statement

The TCR-HHR-02 is a tactical repeater/communications system supporting the Harris 
AN/PRC-152 

(

or AN/PRC-148

 when this option is requested to the factory at time of purchase)

 

series  Multi-band tactical radios  as  part  of  a  man  portable  tactical radio  system  or  as  required 
within  part  of  other  platform  configurations.  The  TCR-HHR-02  shall  meet  the  performance, 
construction,  quality,  and  environmental  requirements  to  support  effective  tactical  deployment 
and use. 

1.1.

 

Safety Precautions. 

This manual contains important safety and operating instructions for the TCR-HHR-02, review 
the Safety Summary at the beginning of this Technical Manual.  

Use of an attachment not recommended or sold by Tricom Research may result in risk of fire, 
electric shock, or personal injury.  

Make sure cords are positioned so that they will not be stepped on, tripped over, or otherwise be 
subjected to damage or stress.  

Do not operate the system with a damaged cable or connector, replace it immediately.  

1.2. Physical 

Description. 

The TCR-HHR-02 is contained within a rugged, water proof (when lid is closed and secured and 
all vents are closed) thermoplastic transit case designed to withstand the harsh conditions 
encountered in the tactical communications environment. All connections to electrical power, 
data (PA remote only), audio and RF input/output are contained in an external jack panel located 
on the right side of the unit (Refer to Figure 1-1). Two on-board Li-Ion batteries (not included) 
provide backup power or can power the case for a limited amount of time, depending on usage 
duty cycle, when external power is not available. Integrated fans allow operation with the lid 
closed. 

Содержание TCR-HHR-02



























Отзывы:

Нет отзывов