background image

No illumination indicates that the Bluetooth 

device paired with the APS+ is disconnected 

or not sufficiently in range.

No LED – Disconnected

always on

<      >

surge      ground      switched

     

sensor

 

always on

<      >

surge      ground      switched

Press the operation button once to turn the 

switched outlets on or off.

Manually Power Switched Outlets  

On/Off

The blue LED indicator on the side of the APS+ provides a visual status notification 

of the Bluetooth connection with the paired device. LED indicator states are 

explained below.

The LED indicator will slowly flash blue 

when the APS+ is in Bluetooth pairing mode.

Slow Flashing Blue LED – Pairing 

Mode

always on

<      >

surge      ground      switched

     

sensor

 

A continually lit blue LED indicates that the 

APS+ is currently connected to a Bluetooth 

device, and that the device is in range. 

Solid Blue LED – Connected

always on

<      >

surge      ground      switched

In order for perform a reset, you will first need to 

unpair the APS+ from your mobile device. Once 

the APS+ has been unpaired, press and hold the 

operation button on the side of the APS+ for 

about 20 seconds until the LED rapidly flashes 

blue. This will restore the APS+ to it's factory 

default.

Once a reset has been complete, you will need to 

re-pair the APS+ with your mobile device, rename 

the APS+ and possibly update the firmware.

Reset to Factory Default

The operation button is a small button located on the side of the APS+. Press the 

operation button to do the following: 

always on

<      >

surge      ground      switched

     

sensor

 

always on

<      >

surge      ground      switched

Press and hold the operation button for at 

about 7 seconds until the LED slowly flashes 

blue to initialize Bluetooth pairing mode.

Initialize Bluetooth Pairing mode

single

press

>5

seconds

>15

seconds

www.tricklestar.com

Operation Button

Bluetooth LED Indicator

     

sensor

 

A rapidly flashing LED indicates you've reset 

the APS+ to it's factory default. You will need 

to re-pair and rename the device, and 

possibly update the firmware.

Rapidly Flashing Blue LED - 

Factory Reset

always on

<      >

surge      ground      switched

     

sensor

 

     

sensor

 

     

sensor

 

®

®

BLUETOOTH

® 

AV ADVANCED POW

Содержание TS1816















Отзывы: