www.tricklestar.com
BLUETOOTH
®
AV ADVANCED POW
< tv >
< tv >
Plug in devices that require continuous
power, such as a DVR, cable box or
gaming system with a hard drive, into
the always-on outlets.
TAV-Link function (optional): Devices
capable of receiving CEC commands
should be plugged into the always-on
outlets (see step 5).
always on
surge
ground
switched
switched
Plug the TV into the control outlet
marked <tv>.
Note: The TV must be plugged into
this outlet.
Remove the backing from the
double-sided tape on top of the
multi-sensor. Affix the multi-sensor to
the TV near the TV's remote sensor,
and position it facing the TV-watching
area.
TAV-LINK CAPABILITY
–OPTIONAL–
If you have a TAV-Link cable (sold
separately) and a TV with HDMI
inputs, plug the TAV-Link cable into an
open HDMI port on the TV.
TAV-Link functionality will softly switch
off (place into an energy-saving mode)
HDMI-connected peripherals capable
of receiving CEC commands.
TAV-LINK CABLE SOLD SEPARATELY
Plug the power strip into a grounded
outlet. The ground and surge lights on
the power strip will illuminate,
indicating the that power strip is
properly grounded, and that surge
protection is active.
Plug the multi-sensor into the port
on the side of the power strip that
looks like a phone jack and marked
“sensor.”
switched
dvd
cable box
game console
amplifier
< tv >
subwoofer
switched
Plug other TV-related electronics into
the switched outlets.
Note: All four switched outlets
operate the same way. The icons
serve only as examples of AV
equipment that can be plugged into
these outlets.
always on
ground
surge
sensor
swiched
Step 3
Step 4
Step 1
Step 5
Step 6
Step 7
Step 2
Set Up Instructions
