Revision: 0
FlexxPump4 B
User Manual
36
EN-
6.3.8 PRO-Menu operating mode Hour-Mode -h-
The PRO-Menu allows you to change the settings of the FP4 Bs dispensing behavior.
You can change the
pause time h
as well as the
number of cycles c
(number of stro-
kes). The basic rule is that during a dispensing cycle the FP4 B performs exactly the
number c of strokes (each 0.16 cm³) specified in the number c of cycles. The dispen
-
sing cycle repeats itself after the number of hours specified in the pause time h.
There is no fault or error at FP4 B.
In the PRO menu, the first step is to set the pause time h and afterwards the number of
cycles c; direct access to the number of cycles c is not possible.
Remove the activation and programming key from the upper housing of FP4 B and
place it on the action area. Hold the activation and programming key on the action
surface. Leave the activation and programming key on the action area until PRO is
displayed in the LCD.
Remove the activation and programming key from the action area as long as PRO is
displayed in the LCD.
Ü
The LCD flashes together with the green LED twice. The LCD first displays the
currently set value of the pause time h (h
is
). Now you have the possibility to change the
values of the pause time h.
