Tribe JETSPOT2, Руководство пользователя

Страница: 16 / 48

JETSPOT2 14
• Press the MENU button repeatedly to exit the menu.
3.12 OPERATIONS IN AUTOMATIC MODE
The unit independently runs through its show. Before you send an automatic program you need to set the
drive as Master/Alone:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter
the next menu.
MASTER SLAVE
Press the UP/DOWN button to scroll through the menu, select Master/Slave and press ENTER to confirm your
choice.
• Press the UP/DOWN button to select the mode of operation:
- Master , if the unit is connected in series with other units and it acts as the Master;
- Slave , if the unit is not connected to other units.
• Press the ENTER button to confirm your choice.
SEQUENCE
The unit independently runs through its show. Before you send an automatic program you need to set the
drive as Master/Alone:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Sequence icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to select the mode of operation: Show 1, Show 2, Show 3, Show 4
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
The unit will go into automatic mode by executing the program automatically.
MODE SPEED
Select this function to set the value of the speed of the internal auto-shows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Play , and press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Speed. and press ENTER to confirm.
• Press the UP/DOWN button to adjust the speed, and then press the ENTER button to confirm your
choice.
• Press the MENU button repeatedly to exit the menu and save changes.