Tribe EZ-Pilot Farmall 105C, Руководство по установке

Страница: 49 / 74

EZ-PILOT STEERING SYSTEM INSTALLATION INSTRUCTIONS
4 – Display Connections
49
Connecting the EZ-Pilot system
C
CAUTION – If the vehicle has a master
electrical disconnect, make sure the
basic power cable (P/N 67258) is
not
directly attached to the battery terminal
that is disconnected by the master
switch - the negative pole in this
example.
Attach this terminal side just past the
main disconnect so that it is as close as
possible to the battery but still gets
disconnected when the master
disconnect is turn off. Failure to do so
can result in damaging the display.
Step 1
Connect the power cable to the battery.
Note – There is another image for this step on
the next page.
Cable P/N 67258 to
Master
disconnect
switch
To tractor (+)
To tractor
chassis (-)
power bus or display
Example battery location