Triax Zapper T2-HD115, Руководство по эксплуатации

Страница: 9 / 32

Quick Guide
Before turning on the power
Initial auto installation
When the Receiver is powered on for the first time after purchase, the first time installation screen
appears. Follow the on-screen instructions to search for all available channels.
Confirm the following before turning on the power
• Is the antenna cable connected?
• Is the power adapter connected and plugged in?
• Is the HDMI cable connected between the Receiver and your TV?
1
Ensure the antenna cable is connected before switching on.
2 Press on the Receiver or Remote Control.
• The first time installation screen is displayed.
3 Press OK to start the channel search.
•
The Receiver will search for, sort and store all receivable channels.
NOTE
• The first time installation process will be aborted if the
Receiver is left unattended for more than 30 minutes
before searching for channels.
• After the first time installation has been completed,
the default PIN is automatically set to ‘0000’.
To change the PIN setting, refer to Page 20.
1 Connect the antenna (IEC 169-2)
75
Ω
coaxial cable, CAI Benchmarked cable such as Triax TX100
2 Connect the HDMI cable
3 Connect the power adaptor
9
Place the TV close to the AC outlet,
and keep the power plug within reach.
1
2 3