Triax Zapper T2-HD115, Руководство по эксплуатации

Страница: 21 / 32

Basic Adjustment
General
21
General
Auto Standby
General
Power Save in Standby Mode
This function allows you to automatically switch
the Receiver into standby mode when there is no
user activity for 3 hours.
This function allows you to control the power
saving features of your Receiver.
Item
Item
Item
Item
Item
Enabled The Receiver will automatically switch
(default)
into standby mode when there is no user
activity for 3 hours.
Automatic The receiver will automatically install
software upgrades when available
Always
Whenever new services (channels)
Start are detected, the Receiver will
automatically tune and store them.
All All messages are displayed.
None No messages are displayed
Information Only information messages are
Messages displayed.
No Minor Only major messages are displayed.
Messages
Always Whenever new services (channels)
Ask
are detected, a message will appear
on screen. You can choose to tune
and store the new services or cancel
the auto retune.
Manual The receiver will display a message
allowing you to confirm or cancel
the software upgrade
Enabled The Receiver uses a very low amount of
(default) power when in standby.
Disabled The Receiver will remain on constantly
unless switched into standby mode by
the user.
Disabled Power saving features are disabled.
This function allows you to control when software
upgrades are installed.
This function allows you to control when new
services (channels) are added and stored on
the Receiver.
This function controls when retune messages
are displayed.
NOTE
• During the digital switchover, Auto retune
messages may be displayed. Follow the on-
screen instructions to retune.
General
Upgrade Software
General
Auto Retune
General
Auto Retune Messages