Basic Adjustment
Manually tuning channels
24
Manual Tune
You can manually tune new services after the first
time installation has been completed.
Item
UHF Channel
Select channel 21-68
Frequency
The frequency of the service
(channel) you are manually tuning.
Bandwidth
The bandwidth of the service
(channel) you are manually tuning.
System
The type of tuning system.
DVB-T = SD (Default)
DVB-T2 = HD
1
Press
/
to select the desired UHF
channel.
2
Press
to select ‘Frequency’ (kHz).
3
Press
/
to adjust the frequency.
4
Press
to select ‘Bandwidth’.
5
Press
/
to adjust the bandwidth.
6
Press
to select ‘System’.
7
Press
/
to select a system.
8
Press the
button to start scanning for
the specified channel. If the channel is
found it will be stored in the Receiver and
will be available in the channel list and EPG.
NOTE
•
You can enter the UHF channel and frequency
using the 0-9 numeric buttons.
This function allows you to perform a first time
installation.
1
Press
Menu
on your remote control
2
From the Menu options on screen,
select
Settings
3
Then select
General
4
Use the navigation buttons to highlight
First Time Installation
5
Press
OK
to select.
6
A warning banner will be shown.
Press
OK
to proceed or exit to cancel.
7
Press
OK
to scan for new services.
You may have to wait a couple of minutes
for the scan to complete.
8
You will receive a message to confirm when
installation is complete.
9
Press
OK
to start watching TV
First Time Installation
Содержание T2-HD 217 PVR
Страница 34: ...Notes 34 ...
Страница 35: ......