Quick Guide
Before turning on the power
Initial auto installation
When the Receiver is powered on for the first time, the
First Time Installation
screen appears.
Follow the on-screen instructions to search for all available channels.
1
Ensure the antenna cable is connected before switching on.
2
Switch on the power socket.
3
Press on the Receiver or Remote Control.
•
The First Time Installation screen is displayed.
4
Press OK to start the channel search.
•
The Receiver will search for, sort and store all receivable channels.
NOTE
•
The First Time Installation process will be
aborted if the Receiver is left unattended
for more than 30 minutes before searching
for channels.
•
After the First Time Installation has been
completed, the default PIN is automatically
set to ‘0000’. To change the PIN setting,
refer to Page 20.
1
Connect the antenna (IEC 169-2)
75
Ω
coaxial cable, CAI Benchmarked cable such as Triax TX100
2
Connect the HDMI cable
3
Connect the power adaptor and switch on at the socket
9
1
2
3
AERIAL IN
RF OUT
ETHERNET
HDMI
VCR
OPTICAL
RS-232
USB
DC 12V IN
SPDIF
TV
Содержание T2-HD 217 PVR
Страница 34: ...Notes 34 ...
Страница 35: ......