2.2 Easy Installation
Ƈ
Scan
• After selecting all that is necessary, press the
RED
button to scan the
satellite list.
Pop up widow will bedisplayed.
• Select ON or OFF according to your
Network
.
• Select All or FTA
Search Type
.
• Select All, TV, or Radio
TV/Radio type
.
• Press the
OK
button and searching will start.
Note
•
After the Degree, Longitude and Latitude is entered accurately,
the DiSEqC Motor will automatically move to the satellite’s position.
Press the
UP/DOWN
buttons to select the desired item on the basic
setting screen.
2.2.5 Connection
It you want to use Tuner 2, you have to select the Connection items.
Select Separated when you have two receiving antennas, and select
Loop Though when you have one. Press the
UP/DOWN
button to select
either Separated or Loop Through and then press the
OK
button.
2.2.6 USALS
Set Longitude and Latitude when you use USALS.
• Press the
UP/DOWN
buttons to select Longitude and Latitude.
• Press the
NUMERIC
buttons to set the angle of Longitude and
Latitude.
• Press the
OK
button to set the direction of Longitude and Latitude.
2.2.7 Copy from Tuner 1 to Tuner 2
Use when you copy channels in Tuner 1 to Tuner 2.
Press the OK button to copy channels in Tuner 1 to Tuner 2.
2.2.8 Copy from Tuner 2 to Tuner 1
Use when you copy channels in Tuner 2 to Tuner 1.
Press the OK button to copy channels in Tuner 2 to Tuner 1.
2.2.9 Copy All
Use this when you copy channels in Tuner 1to Tuner 2 and channels in
Tuner 2 to Tuner 1.
Press the OK button to copy channels in Tuner 1 to Tuner 2 and
channels in Tuner 2 to Tuner 1.
13
