background image

 

4

 

ORB 823/923 Series 

Installation

 

English 

This Manual provides information requisite for the correct connection, acti-
vation and use of an ORB x23 optical receiver. Should you have any queries 
regarding our products, please contact Triax A/S, or one of our nearest distri-
bution representatives. 

 

Products or packaging that are marked with such a logo may not be disposed of together with 
unsorted household waste but should be delivered to a specialized WEEE collection point for re-
cycling and waste reuse. The EU member states and other European countries have different sys-
tems in place for the collection, reuse and recycling of WEEE. By keeping WEEE separate from 
other waste you prevent potential damage to the environment and health effects in humans. 

 

Recycling also saves natural resources. For more information regarding the recycling and reuse of 
waste electronic materials contained in this product , please contact your local town or munici-
pality authorities or a local waste management facility

 

 

Prior to installation, adjustments and using the device, you should refer to 
this User Guide to facilitate the correct configuration and avoid any damage.

 

 

Triax endeavours to provide you with a device that is fully operational. If, 
however, the device becomes damaged in transport for any reason beyond 
the Manufacturer's control, you need to notify the Manufacturer or their 
sales representative of this fact and agree on how to repair the defect. 

 

 

The ORB x23 optical receivers may be stored for 18 months from the date of 
manufacture without any deterioration of its performance. Standard storage 
ambient conditions are in accordance with the environmental specifications 
of IEC 68.1: 

 

temperature 15...35

o

C, humidity 25...70%, pressure 860...1060hPa.

 

 

 

 

 

 

1.0 

 

Environmental 
protection 

 

standards

 

 
 
 
 
 
 
 
 
 
 
 
 

1.1 

 

General 

 

principle of use

 

 
 
 

WARNING! Laser emission 

– 

protect your eyes and skin from both direct and dispersed laser light.

 

Содержание ORB 923 Series









Отзывы: