Triax C-209CX, Руководство пользователя

Страница: 26 / 30

Problem Possible Reason What To Do
LED is not lit. Power is not supplied to the
set-top box.
Check that the power cable is
connected to the set-top box.
No picture or sound. No signal or weak signal. Check the antenna cable on the set-top
box and wall socket.
Check the HMDI/SCART cables on the
set-top box and the TV.
Changes made to settings
have not been saved.
Power to the set-top box was
disconnected before the set-
top box entered STANDBY.
Ensure that the set-top box enters
STANDBY mode before powering off
the set-top box.
Remote control does not
function. virker ikke.
The set-top box is in
STANDBY mode.
The remote control is out of
range.
Batteries are wear or dead..
Press the Standby button.
Check that the remote control is in
range and that the IR receiver on the
set-top box is not blocked.
Replace the batteries.
PIN-Code is unknown. Perform a First Time Installation.
This resets the PIN-Code to ‘0000’.
Recordings are unavailable USB storage device is
unrecognized.
Remove the USB storage device.
Power off the set-top box.
Connect the USB storage device.
Power up the set-top box.
26
Product Support
Trouble Shooting