Triax C-209CX, Руководство пользователя

Страница: 20 / 30

20
• Press MENU on the remote control.
• Select Setup with the “
▲
”/“
▼
” buttons and press
the OK button.
• Select Configuration with the “
▲
”/“
▼
”buttons and
press the OK button.
Country
This select displays the country that was selected
when the set-top box was installed for the first
time.
The country setting can only be modified by
running First Time Installation again.
Setup
Country - Output Settings - Receiver Upgrade
Output Settings
Select Output Settings and press OK .
The following fields are displayed:
TV Type . Select 16:9 format for wide-screen TV sets
and 4:3 format for standard TV’ sets.
Display Format . Select Auto, Letter Box or Pan &
Scan for 4:3 format TV sets and Auto, Pillar Box
or Zoom for 16:9 format TV sets.
SCART mode
. Select ‘RGB’ or ‘CVBS’.
Although the RGB format results in better quality
pictures, not all equipment accomodate RGB
signals.
Prefer Dolby Digital . Select ‘Yes’ or ‘No’.
SPDIF Output . Select ‘LPCM’ or ‘Dolby D.
HDMI Resolution . Select 576P, 720P or 1080i.
AUDIO Delay . Specify the value that the audio is
to be delayed by.
Note : This setting is used to correct audio/video
syncronization issues when Optical Audio is used for
audio signal transmission.
Receiver Upgrade
This setting ensures that the set-top box always
has the most up to date information.
• Select
Receiver Upgrade and press OK .
• Set Automatic scanning to “Enabled” if the set-top
box is or “Disabled”.
• Select
Scan for upgrade
and press
OK
to commence
the upgrade.