10
Signal Level
Bar indicator to show the current signal level.
This bar will have 3 colours to distinguish how good the
signal is, RED=Bad, YELLOW=Medium and GREEN=Good.
Text also diplayed to state if the FE is locked.
Quality
Bar indicator to show the current bit-error-ratio and text
displaying the quality. This bar also have 3 colours
indicating:
GREEN No front end errors.
YELLOW Errors detected but corrected.
RED Un-correctable errors.
When entering the menu the current service will be viewed in the preview
window and the following will be set as defaults:
Channel
“
Current transport UHF channel
”
Frequency
“
Current transport frequency
”
TX Mode
“
Current transport TX mode
”
Before a scan is started or when a scan is started and waiting for SI
information the in formation parameters will be filled with
“
----
”
(dashes) .
Guard Interva
l
“
Current transport Guard Interval
”
Scan
Stopped
4.4.4) Info For Manual Scan Menu
When changing the connection settings, the FE connection settings
will be change and the bars updated to show the current FE
information.
To start a service scan the SCAN option must be selected and toggled
to
“
Started
”
. The user must then wait for the service information to be
found and displayed.
While waiting for the service information and the services to be added
the following will be displayed in the preview windows:
PLEASE WAIT
…
After the scan has completed the scan option will automatically toggle
back to
“
Stopped
”
.
The quarter screen preview will show the first service from the new
services that have been added, along with the service name and
provider name of the previewing service.
The user can then skip through the found services by using the P+ and
P- keys.
If no new services are added then the preview window will stay blanked
and no service or provider name will be displayed. The following will be
displayed in the preview windows:
NO SERVICES ADDED
The options are:
Transmission Mode:
2K Yes/No
8K Yes/No
Guard Interval:
1/32 Yes/No
1/16 Yes/No
1/8 Yes/No
1/4 Yes/No
Press OK key to delete all channels and settings, the following menu
will displayed:
4.4.5) Full Scan Setup
When the
“
Full Scan Setup
”
option is selected, and option list will
be displayed allowing the user to modify what parameters will be
used during the full scan procedure. Depending on the platform
Front-End this menu will have different parameters.
Full Scan Setup Menu
First Time Setup
After initialize, the welcome screen will show.
If the video can't be displayed then one of the following messages will
be displayed in the preview area:
ENCRYPTEDSERV ICE
AUDIO SERVICE
PARENTAL LOCKED
NO SIGNAL
4.4.6) First Time Setup
This menu used to delete all channels and setting to the first time
installation, include Language, TV set, Service, Parental Control set,
and then show the First time welcome screen.
The default settings will be for the UK DTT network which is 'Yes' for
2K TX mode and 1/32 guard interval.
