![background image](http://html1.mh-extra.com/html/triax/492055/492055_user-manual_1160805028.webp)
28
Rev. 01 - 2014 - E
In the service list area you determine the numerical output order of the digital
services on the television or set-top box of the end-user.
Enable HD LCN
Select the Enable HD LCN checkbox if you want an HD
channel to take precedence over the same channel in
SD mode.
Note
You cannot give the same LCN number to
more services.
TDX Service Tool
If you prefer not to use a barker channel you have the following options:
Full Actual - Full Other
All outputs will have all EIT information available, so
all actual present/following, actual schedule, other
present/following and other schedule EIT are sent
out with all muxes.
Full Actual - P/F Other
All outputs will have actual present/following and
actual schedule EIT information, but only other pre-
sent/following EIT information.
Full Actual - No Other
All outputs will have actual present/following and
actual schedule EIT information, and no other EIT
information.
P/F Actual - P/F Other
All outputs will have actual present/following EIT in-
formation and other present/following EIT informa-
tion only.
P/F Actual - No Other
All outputs will have actual present/following EIT
information.
No Actual - No Other
No EIT information is output.
Manual transport
stream ID
Select the Manual transportstream ID if you want to en-
able the Transportstream ID field in the Configuration
windows for output modules.
Use static NIT
version
By default the Use static NIT version checkbox is dese-
lected.
NIT version
Enter the desired number in the LCN number field to
the right of each service in the service list area.
Enable CAT tables
Enter the desired number in the LCN number field to
the right of each service in the service list area.
LCN number and
HD LCN Number
Enter LCN numbers for both the SD and HD channels
in the fields in the service list area.
891076E_492055_492056_TDX_QAM_module - User Guide - EN.indd 28
17-01-2014 11:25:53