TRIATEK FMS-1650L Скачать руководство пользователя страница 41

Страница: 41 / 42

Due to continuous improvement, TRIATEK reserves the right to change product specifications without notice.

•

The cloth may be used dry, or lightly dampened with a mild cleaner or Ethanol.

•

Be sure the cloth is only lightly dampened, not wet. Never apply cleaner directly to touch panel surface; if cleaner is spilled onto touch panel,

soak it up immediately with absorbent cloth.

•

Cleaner must be neither acid nor alkali (neutral pH).

•

Wipe the surface gently; if there is a directional surface texture, wipe in the same direction as the texture.

•

Never use acidic or alkaline cleaners, or organic chemicals such as: paint thinner, acetone, tolulene, xylene, propyl or isopropyl alcohol, or

kerosene.

Touching the current name text

brings up an alphanumeric

keyboard to quickly change the

name of the monitored room.

Touching anywhere else on the

screen enters the

Main Setup

Menu

if no password is stored.

Otherwise, a password must

be entered before the

Main

Setup Menu

can be accessed.

Touching

DATE

brings up the

Date Entry

popup to quickly

change the current displayed

date.

Touching

UNITS

brings up

Engineering Units

selection

popup to quickly change

differential pressure units.

Touching

TIME

brings up

Time

Entry

popup to quickly change

the current displayed time.

Hot-Spot Features of FMS-1650L Touch Screen Display

TRIATEK reserves the right to change product specifications without notice.

FMS-1650L

TRIATEK reserves the right to change product specifications without notice.

Cleaning the FMS-1650L Display

Cleaning the Display

Содержание FMS-1650L











































Результаты поиска

Содержание FMS-1650L

Отзывы:

Похожие инструкции для FMS-1650L

Бренды по названию

Популярные бренды

TRIATEK FMS-1650L, Руководство по установке

Результаты поиска

Содержание FMS-1650L

Отзывы:

Похожие инструкции для FMS-1650L

Бренды по названию

Популярные бренды