PRESTIGE
Wall Frame Kit Instructions
4
7. Measure and mark each Long Strut 2’ from the
top. Position the other Short Strut between the
Long Struts with the Gussets oriented down-
ward as shown in Figure 5. The top of the Short
Strut should be aligned with the marks on the
Long Struts. Install a T-Bolt and nut through
each Gusset and into the channel of the Long
Strut. Tightening the nut will cause the bolt to
turn clockwise 90°. Tighten the nut and confirm
that the T-Bolt rotated 90° and is fully engaging
the channel of the strut.
8. Install two Wall Mounting Brackets onto the
bottom channel of each Short Strut using T-
Bolts and nuts. Position the brackets so that
each will align with the center of a wall stud.
9. Install end caps on the top of each Long Strut.
Install end caps on the bottom of each Long
Strut if not using the optional Leg Kit (Part
#PSSTND03).
2ʼ
Long Strut
Long Strut
Short Strut
Assembly with
Gussets
Short Strut
Assembly with
Gussets
Fig. 5: Complete Assembly
Short Strut
T-Block with
Mounting Bolt
Long Strut
Gusset with
(2) T-Bolts
Wall Mounting
Bracket
Fig. 4: Frame Assembly
