TriangleTube PRESTIGE Solo PA 110, Инструкция по установке и обслуживанию

Страница: 55 / 112

43
CHAPTER
9
CHAPTER 9 - ACVMAX OPERATION
DHW Demand
DHW
186°F
156°F
Target = 186°F
Solo
Radiator icon: indicates that a central heating
call has been received. A small number 1 or 2
indicates which CH calls are active
Faucet icon: indicates that a DHW call has been
received.
Circulator icons: indicate which circulators are currently
powered.
Status line:
displays the current operating state of
the boiler. See Section 9.4 on page 44.
Basic information: The user can toggle
through items using the LEFT and RIGHT keys
to view Target, Supply, Return, Domestic, Out-
door, System and Mix Zone temperatures.
The model is indicated at the top of the screen.
The PRESTIGE Solo is represented in the center of the Home Screen. Basic operating
information such as supply and return temperatures are displayed as well as current
burner status.
A flame symbol is displayed when the unit is fired. The
flame size changes to indicate the current firing rate.
9.3. Home Screen
The Home Screen presents status information in a very
user friendly way so that the current state of the boiler
can be quickly accessed.
• Screen backlight
- it will illuminate when any but-
ton is depressed, and remain illuminated for five
minutes.
• Screen contrast - it can be adjusted at the Home
screen by pressing and holding the
OK
button,
then pressing and holding the LEFT button along
with the
OK
button. Press the
UP
and
DOWN
button to increase or decrease the contrast while
holding the
OK
and
LEFT
buttons depressed. All
buttons must be released and the procedure per-
formed again to switch between increasing and
decreasing contrast.
Main Icons of ACVMAX display
•
Central Heating
- indicates information related
to central/space heating.
• DHW - indicates information related to Domes-
tic Hot Water.
• Home - to go back to the home screen.
• Back - to go back to the previous screen.
•
Warm Weather Shutdown
- displays on the
home screen when the outdoor temperature
reaches the Warm Weather Shutdown tempera-
ture.
• Reset - to reset the system to the factory set-
tings.
• Settings - to access controller settings (lan-
guage, units, etc.).
• Easy Setup - to quickly adjust the most com-
mon settings.
• CH/DHW operation - to enable/disable the
central/space heating or Domestic Hot Water func-
tions
• Information - to get information on the boiler.