background image

Page 8

LIMITED TEN YEAR WARRANTY

Do not return product to original place of purchase

Triangle Engineering of Arkansas, Inc. (Manufacturer) warrants, from 

the date of purchase, to the original purchaser only, that the product 

manufactured by Manufacturer is free from defects in material and 

workmanship for a period of TEN (10) YEARS. Motors, capacitors, 

v-belts and switches are excluded from this warranty, but shall have 

a limited one year warranty from date of purchase to the original 

purchaser.

If a failure of the product occurs, contact the Manufacturer at: 1-800-

255-9014  and give the model number of the product, the purchase 

date, and a description of the problem to the customer service agent. 

Once the problem is diagnosed, and proof of purchase date is 

verified, Manufacturer will have the option of shipping the necessary 

repair part(s) to the Customer, freight prepaid or having the product 

returned to Manufacturer for repair or replacement. If the product is 

returned to the Manufacturer, Customer is responsible for prepayment 

of all inbound freight charges. Upon repair or replacement, which shall 

be at the discretion of Manufacturer, the Manufacturer will prepay all 

outbound freight charges for the return of the product to the customer. 

However, if Manufacturer finds product to be in operating condition 

and no problems are diagnosed, product will be returned to customer 

freight collect.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE 

DESCRIPTION ON THE FACE HEREOF except as provided by this express 

warranty, the goods are sold “as is” without any implied warranties.

This limited warranty does not cover labor to replace warrantied parts 

or motors, nor does it cover failure of the installer to provide adequate 

ventilation to meet minimum exhaust requirements, damage resulting 

from accident, misuse or abuse, lack of proper maintenance, improper 

installation, affixing of any parts or attachments not authorized by 

Manufacturer, or loss of parts. 

In no event shall Manufacturer be liable for any special, incidental, or 

consequential damages; which may result from any defect in material 

or workmanship.

It is expressly understood that Buyer’s sole and exclusive remedy 

shall be repair or replacement of defective parts, and that Triangle 

Engineering shall not be liable for injury to persons or property. Should 

the goods prove so defective, however, as to preclude the remedying 

of warranted defects by repair or replacement, the Buyer’s sole and 

exclusive remedy shall then be a refund of the purchase price.

This warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state. 

MOTOR REPLACEMENT DURING WARRANTY PERIOD: 

 If the motor on your WHOLE HOUSE FAN should fail during the first 

year of operation, simply remove the LABEL ONLY from the motor 

and mail the original label and copy of purchase receipt to Triangle 

Engineering. Once the label is received, and if the motor is still under 

warranty, we will ship a new motor within 24 hours, UPS prepaid. DO 

NOT RETURN MOTOR. 

Under Eave Vent

1

Roofcap

Roof Ridge

Ventilator

 Louvers

(Rectangular &

 Triangular)

2

Turbine Ventilator

(12" throat)

3

4

5

A

A

B

B

A

B

A

A

B

Type QTY.

A (ft.)

B (ft.)

NET FREE

AREA (sq. ft.)

LOSS

FACTOR

NET VENT

(sq. ft.)

=

x

x

x

x

1

2

3

4

5

  

OTHER FORMS OF VENTILATION

TOTAL NET FREE EXHAUST AREA

(sq. ft.)

.5

1

.13

.6

.6

The following work sheet is provided so you may deter-

mine the existing ventilation in your attic. It is necessary 

that you provide adequate ventilation to meet the minimum 

exhaust requirements for the fan you have selected. Should 

you calculations show your exhaust area is inadequate, 

additional ventilation must be provided. Failure to meet 

minimum exhaust requirements will result in a reduction 

of fan efficiency and motor failure.

VENTILATION REQUIREMENTS

  

 

 

 

Min. Free

   Exhaust

  Model 

Area Req’d

  CC 2422 

8 sq. ft.

  CC 3022 

10 sq. ft.

  CC 3023 

11 sq. ft.

  CC 3622 

12 sq. ft.

  CC 3623 

16 sq. ft.

  CC 4223 

18 sq. ft.

  CC 4823 

22 sq. ft.

Содержание COMFORT COOLER CC2422









Отзывы: