See the section “Beeper Control Button”
for the location of this button for your
model.
Note that:
• The collar must be activated.
• The Beeper power must be switched on.
• The transmitter intensity dial must
not be on “N” or “T”
• If you are using a G2 Field or Pro
Series model other than the Upland
G2, your intensity dial must be set
on “A.”
The Beeper and the remote training
collar must be directly across from each
other as shown in the illustration for the
remote on/off feature to work. Slide the
Beeper along the collar strap to achieve
this position.
8.Locate feature.
(Upland G2 and Sport
®
65 BPR G2)
To locate your dog when the Beeper is
silent, press and hold the Beeper button.
You will hear several tones, letting you
know where your dog is.
Beeper Settings
Volume Control:
Two settings – Low or High
Modes:
Range/Point or Point-only.
In the range/point mode, the Beeper
sounds once every 5 seconds while the
dog is running, and sounds once every
1 second when the dog goes on point.
In point-only mode, the Beeper is silent
until the dog goes on point, then sounds
once every 1 second.
Correct
This:
Not This:
Содержание Beeper
Страница 11: ......
