Tri-Tronics Beeper, Руководство пользователя

Страница: 2 / 11

3.Collar strap.
The Beeper is designed to be installed
on the Upland G2 or Sport
®
65 BPR G2
collar strap or on any other Remote
Trainer having a 1-inch collar strap that
fits the Beeper. If you have purchased the
Accessory Beeper, a collar strap has been
included for it. The Beeper will ride best
on the dog's neck if you use a remote
training collar or dummy collar to
counterweight the Beeper. Please see
the illustration showing how to install
the Beeper on a collar strap.
4.Beeper power switch.
The Beeper power must be on for the
Beeper to operate. Press the round power
switch located on the rear surface of the
Beeper. You will hear two tones and the
Beeper light will begin flashing. The
Beeper will begin beeping as soon as its
power is turned on. If you want it to be
silent until you begin hunting, turn it off
with your Upland G2, Sport
®
65 BPR
G2, or with any other Tri-Tronics G2
Field or Pro Series transmitter. To save
Beeper battery life, turn the power switch
off after use.
5.Beeper fit.
Buckle the Beeper snugly on the dog.
The Beeper should be on top of the dog's
neck and the remote training collar or
dummy collar underneath the dog's neck.
Place the Beeper with its power switch
facing towards the dog’s tail.
6.Training collar turned on.
(Upland G2 and Sport
®
65 BPR G2.)
If you are using the Upland G2 or Sport
®
65 BPR G2 model, activate the collar as
described in your Remote Trainer
Owner's Guide. Deactivate after use to
save battery life. Note that the collar
must be activated and the transmitter
intensity dial set on a number (not on
“N”) for you to be able to turn your
Beeper on and off remotely (see No. 7).
7. Remote turn on/off.
(Upland G2, Sport
®
65 BPR G2, and
all Tri-Tronics G2 Field and Pro Series
models)
Pressing the beeper control button turns
the Beeper on or off from a distance.
Several tones confirm “on” and different
tones confirm “off.” The location of the
beeper control button varies with model.