8
TRI TOOL INC.
92-0660 : Rev. 080423
DESIGN AND OPERATING FEATURES
The Model 572AC accepts its own torque through the Collet clamping system.
The Collet provides accurate centering and full diameter support for minimum
distortion of thin wall tubing.
Gear driven powerhead rotates on a precision cross roller bearing.
Single lever actuation of Collet.
Gears are enclosed for operator safety.
The wrenches that are required for operation of the machine are supplied.
CUTTING CAPACITIES
1/8” pipe through 1 1/2” pipe schedule 5
1/4” through 2” (6.35 mm through 50.80 mm) diameter tubing up to .065” (1.65 mm)
wall.
MATERIAL CUTTING CAPABILITES
Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel and aluminum
without limitations other than size and wall thickness as specified.
Inconel and some other high-temperature alloys may require special procedures as
a function of wall thickness.
Contact TRI TOOL Inc.’s Engineering Department for details.
