3-Novemeber-07
HPSC104-SER Manual
Tri-M Engineering
Tel:
800.665.5600, 604.945.9565
1407 Kebet Way, Unit 100
Fax:
604.945.9566
Port Coquitlam, BC V3C 6L3
E-mail:
Canada
Web
site:
www.tri-m.com
10
2.1.6 Control I/O Connector
Note: All outputs are active low. The active state of the IGN signal is programmable by using SCU
the utility.
uSig
GND
20K
Vcc5C
Sig-Out
Output Structure for PF, BL & BE
Microprocessor
Output
Field
Connection
2.2 Jumper Selection
This section describes the function of each jumper, and the location of it.
2.2.1 Interrupt Service Request Jumpers
Jumper CN9 sets the interrupt service request to either IRQ5 or IRQ7.
-
Pin 1 to 2, IRQ5
-
Pin 2 to 3, IRQ7
2.2.2 PC/104 Memory Mapped Address Jumper
Jumper JP2 sets the PC/104 I/O Memory Mapped Address Jumper.
-
Pin 1 to 3, Address 0x300 (300 hex)
-
Pin 2 to 4, Address 0x310 (310 hex)
-
Pin 5 to 3, Address ox320 (320 hex)
-
Pin 6 to 4, Address ox360 (360 hex)
SD
IGN
1
3
2
4
8
6
7
5
IC8
OPTOISOLATOR-DUAL
R12 10K
R49 10K
R50 10K
R51 10K
GND
GND
C62
0.1uF
C63
0.1uF
GND
GND
uMaintained
uMomentary
To Microprocessor
Inputs
Field
Connection
HESC-SER IGN and SD Inputs
