background image

12W LITHIUM-ION RECHARGEABLE 

SOLDERING IRON

MODEL NO: 

SDL10

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

 

‰

  

WARNING!

 Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this    

  equipment, make sure you know where the nearest fire extinguisher is.

 

‰

  

WARNING!

 Always wear approved eye / face protection when operating the soldering iron.

 

‰

  

WARNING!

 Do not use the soldering iron if you notice damage to the workpiece.

 

‰

  

WARNING!

 Always point the soldering iron away from the eyes and body when during operation.

 

‰

  

WARNING!

 Do not put the soldering iron down, put it back in its holder.

 

‰

  

WARNING!

 Only use in a well ventilated area.

 

9

   Keep flammable material away from the torch when operating.

 

8

  

DO NOT

 operate the soldering iron when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

  

DO NOT

 use the soldering iron in an area where paint fumes, solvents or other flammable solids, liquids or gases pose a potential  

  hazard. 

 

8

  

DO NOT

 hold any workpiece by hand.

 

8

  

DO NOT

 touch the workpiece close to the heated area as it will be very hot. Allow to cool.

 

8

  

DO NOT

 operate the soldering iron if it is damaged as this may cause failure and/or possible personal injury.

 

8

  

DO NOT

 touch the top of the soldering iron during or immediately after use, as it will be very hot. Allow to cool.

 

8

  

DO NOT

 allow children to operate the soldering iron.

 

9

   When not in use, store away from direct sunlight in a safe, dry, childproof location.

 

8

  

DO NOT

 store at over 40°C, such as in a car in hot weather.

2.  INTRODUCTION

 

Cordless and lightweight soldering iron. Inbuilt LED to illuminate soldering area in low light areas such as engine bays. Heats up to a  

 

maximum temperature of 600°C and has a 40 minute working time.

3.  SPECIFICATION

Model No.:..................................................................SDL10

Battery:

 ...................................................... 2.5Ah Lithium-ion

Charging time:

................................................................3.5hr

M

aximum Temperature: ............................................... 600

0

C

O

perating Time: ...........................................................

40min

Power Rating:

 .................................................................

12W

4.  CONTENTS

S

DL10     Issue 1    11/06/20

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

 Warning:

Hot surfaces

Do not cover

 Wear eye 

protection

I

tem 

Description

Part number

1

Charging cord for SDL10

S

DL10.CC

2

Soldering stand for SDL10

S

DL10.S

3

12W Cone tip

S

DL11.CT

4

Transparent cap for SDL10 NOT SHOWN

S

DL10TC

Indoor use

only

   fig.1

Отзывы: