15
TIMER 24H
Switch on appliance in any function mode ( ,
or
).
The heater has a timer up to 24 hours; to activate it, press the button 24H (9) from 1 to 24 times.
On display appears the time set and the icon . After the time, the heater will stop.
TEMPERATURE SETTING
-
Switch on appliance in any function mode ( ,
or
).
-
Set the desired temperature (third and fourth digit on display) from 10 to 49°C, with buttons “+” and “-”
(8). In this case the appliance will keep heating until reaching the temperature set.
-
When ambient temperature goes 2 degrees below the temperature set, the heater will switch on again in
high power heating mode
, and then it switches off again when reaching temperature set.
DAY AND TIME SETTING
Switch on appliance in any function mode ( ,
or
).
To set the current week day and the current time:
-
Press button SET (13). On display appears “1”.
-
Set the
day
of the week with buttons “+” e “-” (8). (Monday-1, Tuesday-2, Wednesday-3,
Thursday-4, Friday-5, Saturday-6, Sunday-7).
-
Press again SET (13). The two digits of
hours
twinkle on the display.
-
Set the current hour with buttons “+” e “-” (8).
-
Press again SET (13). The two digits of
minutes
twinkle on the display.
-
Set the minutes with buttons “+” e “-” (8).
The time set flashes for 5 seconds and then is saved. In case the unit is unplugged or switched off with the
general switch (4), you will have to set again the day and the time.
WEEKLY PROGRAM
Firstly set current day and time, as described in previous paragraph.
Switch on appliance in any function mode ( ,
or
).
The button W-TIMER (12) commands the weekly program.
On display, “W” indicates the weekly program function, “ON” is switch on time and “OFF” switch off time.
-
Press W-TIMER (12) and decide the day to program (from 1 to 7) with buttons “+” and “-” (8).
-
Press again W-TIMER (12) to set the
switch on time
of the selected day.
-
Set the hours with “+” and “-” (8).
-
Press again W-TIMER (12). The two digits of minutes will flash.
-
Set the minutes with “+” and “-” (8).
-
Press again W-TIMER (12) to set the
switch off time
of the selected day.
-
Set the hours with “+” and “-” (8).
-
Press again W-TIMER (12). The two digits of minutes will flash.
-
Set the minutes with “+” and “-” (8).
-
Press again W-TIMER (12) to pass to another day, and repeat operation for all the days of the week.
Set temperature in weekly program.
It is possible to associate desired temperature to every day of week.
-
Press W-TIMER (12), then press DELAY (15). On display appears “1-30”, which means that, for
the day “1”, the temperature set is 30 degree.
-
Set the temperature (10-49°C) of day “1” with buttons “+” and “-” (8).
-
Press again DELAY (15) and set temperature (10-49°C) of day “2” with buttons “+” and “-” (8).
-
Repeat operation for all the days of the week.
AUTO MODE
Switch on appliance and push button AUTO (14). On display appears
. The heater now works in energy
saving mode, and detects sudden variation of ambient temperature, that may be due to a window opening. The
heater will switch off is a variation of 3 degree in less than one minute is measured.
To disable that function, press again the button AUTO (14); the symbol
disappears.
LOCK BUTTONS
Press LOCK (11) to block all the keys of the remote control. Press again LOCK to enable again.
Содержание G3 FERRARI TEPOR
Страница 18: ...17...