RA 738S
English
1. Phone jack
2. Volume knob
3. Switch AM/FM/ OFF
4. Tuning Knob
5. Clip
6. Dial scale
7. Battery compartment door
BATTERY POWER OPERATION
Install 2 x “AAA” batteries into the battery campartment
(7) on the backside of the device, carefully as indicated
in the battery compartment.
Remove the batteries when don't use the device for a
long time.
OPERATION
1. Selector Switch on the appliance using the AM/ FM
switch (3)
2. Choose the band selector switch (3):
FM = frequency modulation
AM = medium wave
3. Tune in the station you want to listen to with the
control knob (4).
4. Adjust the volume control (2).
RECEPTION NOTE
When listening to FM, the headphones cord serves also
as an antenna. Extending the cord to improve reception.
When listening to AM, put the unit in an upright position
and turn it for best.
CONTROL AND THEIR FUNCTIONS
PHONE JACK
For listening connect a headphones with a 3,5 mm plug.
MAINTENANCE
This device is a high precision electronic instrument; so
it's recommended to not place the radio set near sources
of heat, in humid or dusty places, nor expose it directly
to the sunlight.
Clean the radio with a damp cloth. Using detergents,
abrasives or solvents may damage the radio set.
TECHNICAL SPECIFICATION
Power sources:
2x"AAA"bateries not included
Frequency range:
FM 87,5-108MHz
AM 530-1600KHz
Dimensions: 92x50x16mm
TREVI pursues a policy of continuous research and de-
velopment. Therefore the characteristics of the product
can differ from those in the description.
