Tresco Radar Overlay - Operator’s manual
Page 10
Installation
The installation on board should only be performed by a Tresco authorized
company. An extra Tresco installation instruction manual is made available for this
purpose.
Only a general installation overview is given here.
The following items belong to your product:
•
a Tresco overlay-PC
•
a Tresco CD “Tresco Radar Overlay”
•
a PCI Radar-Interface Board (RIB)
•
(optionally) a 2-input video switch
•
Cables, etc…
1. PC Installation
An approved PC with the required specifications should be installed:
•
Installation of extra hardware,
•
Installation of software
•
Connection to external devices.
2. Radar connection
Connect the screen video signal from the radar to:
•
the second input of the video-switch, and,
•
the radar-overlay PC.
3. Video switch installation (optionally)
This switch should be easily accessible to the user. It allows the operator to switch
between radar image and radar with underlaid chart.
The radar-overlay can be installed in two different ways:
•
radar and PC have separate monitors, or,
•
radar and PC
share
one and the same monitor.
The following pictures clarify this by using schematic diagrams:
