Trenz Electronic TE0808 TRM Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 46

background image

TE0808 TRM

Revision: v.32

Copyright © 2019 Trenz Electronic GmbH

45 of 46

http://www.trenz-electronic.de

13 Disclaimer

13.1 Data privacy

Please also note our data protection declaration at

https://www.trenz-electronic.de/en/Data-protection-Privacy

13.2 Document Warranty

The material contained in this document is provided

“as is”

and is subject to being changed at any time without

notice.  Trenz  Electronic  does  not  warrant  the  accuracy  and  completeness  of  the  materials  in  this  document.
Further,  to  the  maximum  extent  permitted  by  applicable  law,  Trenz  Electronic  disclaims  all  warranties,  either
express or implied, with regard to this document and any information contained herein, including but not limited to
the  implied  warranties  of  merchantability,  fitness  for  a  particular  purpose  or  non  infringement  of  intellectual
property. Trenz Electronic  shall not be  liable for errors or  for  incidental  or  consequential damages in  connection
with the furnishing, use, or performance of this document or of any information contained herein.

13.3 Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any
damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business
interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to
this document, or the materials or information contained at any or all such documents. If your use of the materials
or information from this document results in the need for servicing, repair or correction of equipment or data, you
assume all costs thereof.

13.4 Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval
or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

13.5 Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /
modified / copied only in accordance with the terms of such license.

13.6 Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also
oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of
their social responsibility and contribute to the preservation of our common living space. That is why Trenz
Electronic invests in the protection of our Environment.

13.7 REACH, RoHS and WEEE

REACH

«
...
43
44
45
46
»

Содержание TE0808 TRM















































Отзывы:

Нет отзывов

Похожие инструкции для TE0808 TRM

Бренд: ABB Страницы: 4

Chlorinsitu-III

Бренд: ProMinent Страницы: 120

Бренд: Kärcher Страницы: 188

Бренд: LevelOne Страницы: 2

Бренд: ABB Страницы: 13

Бренд: Haklift Страницы: 18

Бренд: Vahle Страницы: 28

Бренд: 493K Страницы: 65

Бренд: Dantel Страницы: 46

SUNSUN Skimmer CSP-40

Бренд: WilTec Страницы: 8

Allen-Bradley 6200P-NS3A1

Бренд: Rockwell Automation Страницы: 28

Бренд: Berker Страницы: 3

Бренд: Goodwe Страницы: 33

Бренд: Fagor Страницы: 16

Бренд: Delta Electronics Страницы: 11

Бренд: ROVEMA Страницы: 157

Бренд: RINGSPANN Страницы: 16

Бренд: CEMO Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды