Trenz Electronic TE0808 TRM Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 46

background image

TE0808 TRM

Revision: v.32

Copyright © 2019 Trenz Electronic GmbH

46 of 46

http://www.trenz-electronic.de

25

http://guidance.echa.europa.eu/

26

https://echa.europa.eu/candidate-list-table

27

http://www.echa.europa.eu/

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream
user in the sense of

. The products we supply to you are solely non-chemical products (goods). Moreover

and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not
release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet.
According to present knowledge and to best of our knowledge, no

SVHC (Substances of Very High Concern) on the

are contained in our products. Furthermore, we will immediately and unsolicited inform our

customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of
0,1 % weight by weight) will be classified as SVHC by the

European Chemicals Agency (ECHA)

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS
compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European
Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical
and  electronic  equipment  as  unsorted  municipal  waste  and  to  collect  such  waste  electrical  and  electronic
equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing
final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member
States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the
precondition  to  ensure  specific  treatment  and  recycling  of  waste  electrical  and  electronic  equipment  and  is
necessary to achieve the chosen level of protection of human health and the environment in the European Union.
Consumers  have  to  actively  contribute  to  the  success  of  such  collection  and  the  return  of  waste  electrical  and
electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential
effects  on  the  environment  and  human  health.  The  symbol  consisting  of  the  crossed-out  wheeled  bin  indicates
separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered

under WEEE-

Reg.-Nr. DE97922676.

2018-09-18

«
...
44
45
46

Содержание TE0808 TRM















































Отзывы:

Нет отзывов

Похожие инструкции для TE0808 TRM

Бренд: Sagola Страницы: 8

Бренд: J.E. Adams Страницы: 34

Бренд: S&H Industries Страницы: 9

Бренд: Climax Страницы: 50

Бренд: Flintec Страницы: 12

Бренд: eta Страницы: 32

Бренд: Baader Страницы: 46

Бренд: CEMO Страницы: 52

Бренд: Kittec Страницы: 24

Бренд: CLEAN ROOM DEVICES Страницы: 26

Compact Ejector SCPMc

Бренд: Schmalz Страницы: 52

Бренд: Schmalz Страницы: 68

Swing Arm SA-G 300

Бренд: Nederman Страницы: 21

Бренд: STI Страницы: 8

AnyTouch V606e+

Бренд: RS Automation Страницы: 20

Бренд: L&L Kiln Mfg, Inc. Страницы: 72

Бренд: dymax Страницы: 20

Бренд: ILCO Unican Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды