Trenz Electronic TE0714 TRM, Руководство пользователя

Страница: 17 / 22

TE0714 TRM Revision: v.55
Copyright © 2019 Trenz Electronic GmbH
17 of 22 http://www.trenz-electronic.de
11
https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Artix-7/TE0714-Artix-7/
12
https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Artix-7/TE0714-Artix-7/
10 Variants Currently In Production
Trenz shop TE0714 overview page
English page
11
German page
12
Table 14: Trenz Electronic Shop Overview
On REV 01 JM2 Pin 54 was connected to GND. When R27 is not populated, REV 02 is backwards compatible
to REV 01. When R27 is set, check your baseboard to not connect this pin to GND. For all new baseboards
JM2.54 should be used as VCCIO output (it will then be 1.8V or 3.3V depending the voltage settings on the
module.
