Trenton T4G, Техническое описание

Страница: 66 / 144

System BIOS T4G Technical Reference
TRENTON Technology Inc. 3-12
The Change Supervisor Password feature can be configured so that a password must be
entered each time the system boots or just when a user attempts to enter the BIOS Setup
Utility.
_______________________________________________________________________
NOTE: The null password is the system default and is in effect if a password has not
been assigned or if the CMOS has been corrupted. In this case, the "Enter CURRENT
Password" prompt is bypassed when you boot the system, and you must establish a new
password.
_______________________________________________________________________
If you select the Change Supervisor Password option, the following window displays:
This is the message which displays before you have established a password, or if the last
password entered was the null password. If a password has already been established, you
are asked to enter the current password before being prompted to enter the new
password.
Type the new password and press <Enter>. The password cannot exceed six (6)
characters in length. The screen displays an asterisk (*) for each character you type.
After you have entered the new password, the following window displays:
Re-key the new password as described above.
If the password confirmation is miskeyed, AMIBIOS Setup displays the following
message:
No retries are permitted; you must restart the procedure.
If the password confirmation is entered correctly, the following message displays:
Enter New Password
Confirm New Password
Passwords do not match!
[Ok]
Password installed
[Ok]