Trenton T4G, Техническое описание

Страница: 57 / 144

System BIOS T4G Technical Reference
TRENTON Technology Inc. 3-3
When password checking is enabled, the following password prompt displays:
Type the password and press <Enter>.
_______________________________________________________________________
NOTE: The null password is the system default and is in effect if a password has not
been assigned or if the CMOS has been corrupted. In this case, the password prompt
does not display. To set up passwords, you may use the Change Supervisor Password
and Change User Password options on the Security Menu of the BIOS Setup Utility.
(See the Security Setup section later in this chapter.)
_______________________________________________________________________
If an incorrect password is entered, the following screen displays:
You may try again to enter the correct password. If you enter the password incorrectly
three times, the system responds in one of two different ways, depending on the value
specified in the Password Check option on the Security Menu:
1) If the Password Check option is set to Setup, the system does not let you
enter Setup, but does continue the booting process. You must reboot the
system manually to retry entering the password.
2) If the Password Check option is set to Always, the system locks and you
must reboot. After rebooting, you will be requested to enter the password.
Once the password has been entered correctly, you are allowed to continue.
BIOS Errors
If an error is encountered during the diagnostic checks performed when the system is
powered on, the error is reported in one of two different ways:
Enter CURRENT Password:
Enter CURRENT Password: X
Enter CURRENT Password: