Trenton T4G, Техническое описание

Страница: 101 / 144

PCI Plug and Play Setup T4G Technical Reference
TRENTON Technology Inc. 5-1
Chapter 5 PCI Plug and Play Setup
PCI P
LUG AND
P
LAY
S
ETUP
When you select PCIPnP from the BIOS Setup Utility Main Menu, the following Setup
screen displays:
PCIPnP Setup Screen
When you display the PCIPnP Setup screen, the format is similar to the sample shown
above, except the screen does not display all of the options at one time. If you need to
change other options, use the down arrow key to locate the appropriate option.
Highlight the option you wish to change and press <Enter> to display the available
settings. Select the appropriate setting and press <Enter> again to accept the highlighted
value.
BIOS SETUP UTILITY
Main Advanced |PCIPnP| Chipset Boot Security Exit
Advanced PCI/PnP Settings
______________________________________________
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug & Play O/S [No]
Reset Config Data [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
PCI IDE BusMaster [Disabled]
Offboard PCI/ISA IDE Card [Auto]
IRQ3 [Available]
IRQ4 [Available]
IRQ5 [Available]
IRQ7 [Available]
IRQ9 [Available]
IRQ10 [Available]
IRQ11 [Available]
IRQ12 [Available]
IRQ14 [Available]
IRQ15 [Available]
DMA Channel 0 [Available]
DMA Channel 1 [Available]
DMA Channel 3 [Available]
DMA Channel 5 [Available]
DMA Channel 6 [Available]
DMA Channel 7 [Available]
Reserved Memory Size [Disabled]
Reserved Memory Address [C8000]
NO: Lets the BIOS
configure all the
devices in the system.
YES: Lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
←→
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
vxx.xx (C)Copyright 1985-2002, American Megatrends, Inc.