Section 4 / Regulatory Compliance
8
BAM8270 Manual
Regulatory Compliance
DECLARATION OF CONFORMITY
FCC
This device complies with part 15 of the FCC rules as a Class A device. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that might cause undesired operation.
CE
This equipment complies with all applicable European Union (CE) directives if it has a CE marking. For
this device to remain CE compliant, only CE compliant parts can be installed, and proper cables and
cabling techniques are required.
AGENCY APPROVALS
All standards should be at applicable revision levels at time of test.
Electromagnetic Emissions (EMI)
Designed to FCC Class A as a minimum.
Designed for CE Conformity to EN 55032:2015/A11:2020, EN 61000-3-2:2014, EN 61000-3-
3:2013, and EN 55035:2017/A11:2020 including EN 61000-4-2:2008, EN 61000-4-
3:2006/A1:2007/A2:2010, EN 61000-4-4:2012, EN 61000-4-5:20105, EN 61000-4-6:2008, and EN
61000-4-11:2004.
This product will be approvable for MIL-STD-461G to system test methods RE102, and CE102.
Safety
This product will be approvable for safety concerns and designed for EN 62368-1:2018.
Environmental
This product will be approvable for MIL-STD-810H High and Low-Temp Operating and Storage
system testing to test methods 501.7 and 502.7, Procedures I and II.
This product will be approvable for MIL-STD-810H Altitude Operational and Storage system
testing to test method 500.6, Procedures I and II.
We are planning to test:
O
Humidity per MIL-STD-810H, Method 507.6, Procedure I with 90% RH max
