Boot From File
o
Selecting this option allows the user to boot from a file on a connected storage device.
Administer Secure Boot
o
This option may only be accessed before booting to any device. If the BIOS menu has
been entered by exiting UEFI shell, the user must reset the system and enter BIOS
directly to access this menu.
Setup Utility
o
Selecting this option will bring the user to the Setup Utility menu for peripheral
configuration and setup features. The following section(s) will cover highlighted options
and areas for the Setup Utility
Advanced --> Trenton Systems will display information about the system, including the platform and
BIOS version.
Advanced --> Video Configuration --> Display Mode
-
This setting allows the user to switch between on-board video or plug-in video as the default video
source.
Advanced --> Socket Configuration --> Processor Configuration
-
This menu displays information about the system’s processors, as well as some configuration
options.
Advanced --> Socket Configuration --> IIO Configuration --> Socket 0/1
-
This menu will allow for configuration of the system’s PCIe. Under each Socket, there will be several
ports for each PCIe slot in the system. The mapping for these ports can be found above on the
section on Serial Interconnect Configuration. Within each port are options to set the maximum port
width and speed.
Each of these options allows you to review and/or change various setup features of your system.
Contact Trenton for application-specific BIOS information and support.
To enter the BIOS setup menu, power the system on and begin striking the <Esc> key.
Locating the BIOS version on the BAM8270
To locate the BIOS version, perform the following:
1.
Enter the BIOS menu by striking ESC while booting.
2.
Select the Setup Utility option
3.
Select the Advanced menu.
4.
Select the Trenton Systems submenu
