TRENDnet TW100-BRV324 Скачать руководство пользователя страница 37

Страница: 37 / 135

PC Configuration

Macintosh Clients

From your Macintosh, you can access the Internet via the Broadband VPN Gateway. The procedure is as follows.

Open the TCP/IP Control Panel.

Select

Ethernet

from the

Connect via

pop-up menu.

Select

Using DHCP Server

from the

Configure

pop-up menu. The DHCP Client ID field can be left blank.

Close the TCP/IP panel, saving your settings.

Note:

If using manually assigned IP addresses instead of DHCP, the required changes are:

•

Set the

Router Address

field to the Broadband VPN Gateway 's IP Address.

•

Ensure your DNS settings are correct.

Linux Clients

To access the Internet via the Broadband VPN Gateway, it is only necessary to set the Broadband VPN Gateway as the "Gateway".

Ensure you are logged in as "root" before attempting any changes.

Fixed IP Address

By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address, make the following
changes to your configuration.

•

Set your "Default Gateway" to the IP Address of the Broadband VPN Gateway.

•

Ensure your DNS (Name server) settings are correct.

To act as a DHCP Client (recommended)

The procedure below may vary according to your version of Linux and X -windows shell.

Start your X Windows client.

Select

Control Panel - Network

Select the "Interface" entry for your Network card. Normally, this will be called "eth0".

Click the

Edit

button, set the "protocol" to "DHCP", and save this data.

To apply your changes

•

Use the "Deactivate" and "Activate" buttons, if available.

•

OR, restart your system.

Other Unix Systems

To access the Internet via the Broadband VPN Gateway:

•

Ensure the "Gateway" field for your network card is set to the IP Address of the Broadband VPN Gateway.

•

Ensure your DNS (Name Server) settings are correct.

Содержание TW100-BRV324








































































































































Результаты поиска

Содержание TW100-BRV324

Отзывы:

Бренды по названию

Популярные бренды

TRENDnet TW100-BRV324, Руководство пользователя

Результаты поиска

Содержание TW100-BRV324

Отзывы:

Бренды по названию

Популярные бренды