TRENDnet TPL-304E, Быстрое руководство по установке, Страница: 10 / 13

8
1. Go into the Control Panel , click Network and
Internet , click Network and Sharing Center , click
Manage Network Connections and then right-
click the Local Area Connection icon and then
click Properties .
Windows Vista
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on Obtain
an IP address automatically.
1. Go into the Control Panel , double-click the Network
Connections icon and then right-click the Local
Area Connection icon and then click Properties .
Windows XP/2000
2. Click Internet Protocol (TCP/IP) and then click
Properties. Then click on Obtain an IP address
automatically.
4. I tried changing the Private Network Name and applying it to all of my TPL-304E devices,
but “Some devices could not be added to your network” error appears. I can no longer see
any of the remote TPL-304Es. What should I do?
1. Open up the TRENDnet Powerline Utility, click the Privacy tab, click Use Default (Public
Network) and then click Set Local Device Only .
2. Make sure to add each remote TPL-304E's password. See step 12 in Section 2 (How to
Install).
5. I have a HomePlug 1.0 or HomePlug Turbo network. Can I use this with my network?
The TPL-304E is not backwards compatibile with HomePlug 1.0 or HomePlug Turbo.
6. Do I need to reconfigure my TPL-304E after I hit the reset button.
The TPL-304E will automatically connect with each other once both units are reset to default
settings.
If you still encounter problems or have any questions regarding the TPL-304E/TPL-304E2K ,
please refer to the User's Guide included on the Utility CD-ROM or contact TRENDnet's Technical
Support Department.